Perlick PS60 Bedienungsanleitung PDF herunterladen (Seite 7)

Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.

Reversing Door Hinge

Form No. Z2279

Rev 08.01.07

Tools Required

■

Phillips Screwdriver.

■

#4 Allen Wrench.

■

Flathead Screwdriver or Putty Knife

Right Hinged Door

(as shipped from factory)

Operations to Perform on Cabinet

STEP 1:

Remove bottom hinge pin from

assembly.

STEP 2:

Carefully lift and tilt out door

assembly from the unit and

set aside.

STEP 3:

Remove lock rail from

cabinet, requires removal of

four screws.

STEP 4:

Remove top hinge pin.

Remove top and bottom hinge

brackets from the unit.

STEP 5:

Remove hinge bushing from

bottom hinge bracket and

assemble to top hinge bracket.

STEP 6:

Taking care not to scratch the sur-

face, remove hole plugs from the

left hinge holes.

STEP 7:

Insert hole plugs into vacant right

hinge holes

STEP 8:

Re-assemble hinge brackets to unit. Bottom right bracket

is assembled as the top left bracket. Top right bracket is

assembled as the bottom left bracket.

STEP 9:

Re-insert top hinge pin.

STEP 10:

Re-assemble lock rail from

STEP #3

Operations to Perform on Door

STEP 11:

Remove bottom door hinge bracket from door assembly

and remove door hinge bushing from bracket.

Re-assemble door hinge bracket to previous position,

without bushing.

STEP 12:

Remove top door hinge bracket from door assembly and

assemble door hinge bushing from STEP 11 to bracket.

Re-assemble door hinge bracket to previous position

with bushing attached.

STEP 13:

Remove handle and reposition in other set of pre-drilled

mounting holes directly underneath..

STEP 14:

Remove lock retainer and install on opposite end of

door..

STEP 15:

What was the door top is now the door bottom. Carefully

lift the door onto the hinge brackets of the cabinet. The

two hinge bushings should meet. reinsert the bottom

hinge pin to complete the door switching operation.

Step #12 Step #11 Step #13

Step #14

Step #6

Step #7

Remove

these screws

Top Hin

e Bracket

Bottom Hin

e Bracket

Top Hin

e Bracket

Bottom Hin

e Bracket

Hin

e Bushin

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

Perlick PS60 Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern